Advertisement
Read the instructions and keep them safe. If you pass the citrus press on, pass on the
instructions too. Remove all packaging, but keep it till you know the citrus press works.
important safeguards
Follow basic safety precautions, including:
1 This citrus press must only be used by or under the supervision of a responsible
adult. Use and store the citrus press out of reach of children.
2 Don't put the motor unit in liquid, don't use it in a bathroom, near water, or
outdoors.
3 Route the cable so it doesn't overhang, and can't be tripped over or caught.
4 Unplug before dismantling or cleaning.
5 Sit the motor unit on a stable, level surface.
6 Keep the citrus press and the cable away from hotplates, hobs or burners.
7 Store the citrus press away from direct sunlight, and, if possible, from fluorescent
light.
8 Don't run the motor for more than 2 minutes, or it may overheat. After 2 minutes,
switch off for at least 2 minutes, to let the motor cool.
9 Don't use the citrus press for any purpose other than those described in these
instructions.
10 Don't use the citrus press if it's damaged or malfunctions.
11 If the cable is damaged, return the citrus press, in order to avoid hazard.
dismantling
1 Unplug the citrus press.
2 Lift the reamers off the drive shaft.
3 Grip the large reamer in one hand, and the wings of the small reamer in the other,
and separate the two reamers.
4 Lift the separator off the juice collector.
5 Lift the juice collector off the motor unit.
6 Pull the drive shaft up and off the motor unit.
care and maintenance
7 Unplug the citrus press.
8 Wipe outer surfaces with a damp cloth. If necessary, use a little washing-up liquid.
9 Wash the removable parts in warm soapy water, rinse well, and dry.
10 Don't wash any part of the citrus press in a dishwasher.
11 The extreme environment inside the dishwasher can affect the surface finishes.
12 Don't put the citrus press in water or any other liquid.
13 Don't use harsh or abrasive cleaning agents or solvents.
assembling
14 Unplug the citrus press.
15 Sit the motor unit on a stable, level surface.
16 Push the bottom of the drive shaft into the hexagonal hole top of the motor unit.
17 Align the spout with the space in the front of the motor unit, and lower the juice
collector on top of the motor unit.
18 Lower the separator on top of the juice collector.
household use only
3
Advertisement
