Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Russell Hobbs 14597
Summary of Contents for Russell Hobbs 14597
- Page 1 instructions...
-
Page 3: Important Safeguards
Read the instructions and keep them safe. Pass them on if you pass the coffee maker on. Remove all packaging, but keep it till you know the coffee maker works. important safeguards Follow basic safety precautions, including: 1 The coffee maker must only be used by or under the supervision of a responsible adult. -
Page 4: Water Fill
water fill 4 Use the carafe to fill the reservoir, to avoid overfilling. 5 Remove the carafe from the hotplate. 6 Press the lever at the rear of the handle, to open the carafe. 7 Use the grip to open the coffee maker lid, to expose the reservoir, the filter holder, and the filter. -
Page 5: Ground Coffee
stopping 16 If you need to cancel the timer before brewing has started, you can either: a) press and release the [ button twice – the first press overrides the timer, and turns the light on, to make coffee, the second press turns the light off, and resets the display to the correct time or b) press and release the T button once, then immediately press and release the [ button... -
Page 6: Storing Coffee
storing coffee 31 Coffee is best kept in an airtight container in a cool dry place, or in the fridge. Exposure to air oxidises coffee and allows the flavour to evaporate. milk 32 There’s a great deal of contention on the subject of milk in coffee. Our view is that personal taste should rule, not convention. - Page 7 Use a proprietary brand of descaler suitable for use in plastic-bodied products. Follow the instructions on the package of descaler. When descaling has finished, empty the carafe and operate the coffee maker twice more with fresh water, but without coffee. Discard the water to ensure that no chemical residues are left in the coffee maker.
- Page 8 connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.