Increasing Speed While Using Speed Control; Reducing Speed While Using Speed Control - Ford Explorer 2004 Owner's Manual

Driver Controls

Increasing speed while using speed control

There are two ways to set a higher
speed:
• Press and hold the SET + control
until you get to the desired
speed, then release the control.
You can also use the SET +
control to operate the Tap-Up
function. Press and release this
control to increase the vehicle set
speed in small amounts by 1.6
km/h (1 mph).
• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET + control.

Reducing speed while using speed control

There are two ways to reduce a set
speed:
• Press and hold the COAST/CST
control until you get to the
desired speed, then release the
control. You can also use the
COAST/CST control to operate
the Tap-Down function. Press and
release this control to decrease
the vehicle set speed in small
amounts by 1.6 km/h (1 mph).
• Depress the brake pedal until the
desired vehicle speed is reached,
press the SET + control.
56
2004 Explorer (exp)
Owners Guide (post-2002-fmt)
USA English (fus)
RES
SET
+
COAST
RES
SET
+
COAST
RES
SET
+
COAST