Sounding A Panic Alarm; Memory Feature (Seat, Mirrors And Adjustable Pedals); Programming Memory Feature To Transmitter; Deprogramming Memory Feature From Transmitter - Ford F-150 2011 Owner's Manual

Sounding a panic alarm

Press to activate the alarm. Press again or turn the ignition to on to
deactivate.
Note: The panic alarm will only operate when the ignition is off.

Memory feature (seat, mirrors and adjustable pedals)

The integrated keyhead transmitter (IKT) allows you to recall the
memory seat/power mirrors/adjustable pedals feature.
Press to automatically move the driver seat, power mirrors and
adjustable pedals to the desired memory position. (The seat position
corresponds to the transmitter being used).

Programming memory feature to transmitter

To activate this feature:
1. Move the driver seat, power mirrors, and adjustable pedals to the
desired positions using the associated controls.
2. Press and hold control button 1
for five seconds. A tone will be
heard after two seconds confirming
memory position has been set.
Continue to hold until a second tone
is heard after five seconds.
3. Within three seconds press
4. Wait 10 seconds, then press
5. Repeat this procedure for
memory 2 and another transmitter if
desired.

Deprogramming memory feature from transmitter

To deactivate this feature:
1. Press and hold either the 1 or 2 control on the driver's door for five
seconds. A tone will be heard after 1
is done, continue to hold until a second tone is heard after five seconds.
2. Within three seconds press
3. Repeat this procedure for another transmitter if desired.
2011 F-150 (f12)
Owners Guide, 1st Printing
USA (fus)
Locks and Security
.
.
⁄ seconds when the memory store
1
2
.
147