Wireless Network; Install The Drivers & Software - Brother DCP-J140W Quick Start Manual

Hide thumbs Also See for DCP-J140W:
Table of Contents

Advertisement

Wireless Network

Install the drivers & software
®
(Windows
XP Home/XP Professional x64 Edition/Windows Vista
13
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
14
Install MFL-Pro Suite
a
Put the supplied installation CD-ROM into your
CD-ROM drive. Follow the on-screen
instructions.
b
The CD-ROM Top Menu will appear. Click
Install MFL-Pro Suite and click Yes if you
accept the license agreements. Follow the
on-screen instructions.
c
Choose Wireless Network Connection, and
then click Next.
d
When Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are using a firewall other than the
®
Windows
Firewall see the instructions
provided with your firewall software for
information on how to add the following
network ports.
For network scanning, add UDP port 54925.
If you still have trouble with your network
connection, add UDP port 137 and 161.
®
®
/Windows
7)
e
Choose your machine from the list, and then
click Next.
Note
• If your wireless settings fail, the Wireless
Device Setup Wizard will appear during the
installation of MFL-Pro Suite. Confirm your
settings by following the on-screen
instructions. If you encounter this failure, go to
step 11-b on page 11 and setup the wireless
connection again.
• If you are using WEP and the LCD displayed
Connected but your machine is not found,
make sure you entered the WEP key correctly.
The WEP key is case sensitive.
f
The installation of the Brother drivers will
automatically continue. The installation
screens appear one after another.
g
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
h
If you do not want to set your machine as the
Default printer, uncheck Set as Default
Printer(This setting will be applied to the
current user.) and then click Next.
®
Windows
15

Advertisement

Table of Contents
loading

Table of Contents