Ricoh DDP184 User Manual page 146

Message
Sleep Mode
Stacker x Basket Not Set
Check Basket
Stacker x Basket Size
Change Basket
Stacker x Front Cover Open
Close Cover
Stacker x Mixed Paper
Empty Basket
Stacker x Paper Full
Remove Paper
Stacker x Top Cover Open
Close Cover
Stacker x V Path Cover
Open
Close Cover
Sub Tray Cover Open
Close Cover
Sub Tray Paper Full
Remove Paper
Suspended Task
Switch Back Cover Open
Close Cover E045
Toner Collector Bottle Full
Replace Bottle E010
or E013
Toner Collector Not Set
Check Toner Bottle E01D
Toner Low Add Toner
Toner Out
Supply Toner E011
Toner Unit Not Set
Check Toner Unit E036
Top Cover Open
Close Cover E042
Tray 1 Open
Close Tray E020
Tray 1, 2, or 3 Open
Description
The Energy Save time has been
reached and the printer is in energy
saving mode.
The stacker basket is not seated
properly. x is the stacker number.
The stacker basket is the wrong size
for the requested paper type. x is the
stacker number.
Self-explanatory.
The stacker contains paper from a
previous job.
The stacker is full. x is the stacker
number.
The top cover of the indicated stacker
is open. x is the stacker number.
The V path cover of the indicated
stacker is open. x is the stacker
number.
Self-explanatory.
Self-explanatory.
The printer may have a problem on
execution.
Self-explanatory.
Self-explanatory.
The toner collector bottle is not seated
properly.
Print quality will diminish until toner is
replenished.
The toner supply is empty
Self-explanatory
Self-explanatory.
Self-explanatory.
Self-explanatory.
L
OG
OG L
Corrective Action
Sleep mode is cancelled when
1. the printer is On Line
2. any OCP key is pushed.
3. the consumable counter is reset
from the Web.
4. printer Status is displayed from the
Web.
Reseat the basket.
Change the basket.
Close the cover.
Remove the paper.
Remove the paper.
Close the cover.
Close the cover.
Close the cover.
Remove the paper.
Cycle Power.
Close the switch back cover (on the
left side of the printer).
Replace the toner collector bottle.
Reseat the bottle.
Supply toner.
Supply toner.
Set the toner unit.
Close the guide.
Close the tray.
Close the tray.
0 1
0 0
Troubleshooting 5-19