DigiTech Vocalist Live FX Owner's Manual page 62

• TEMPO (60-300)
This parameter allows you to set the tempo for the Delay effect. This
parameter is directly tied to the Modulation TEMPO parameter; editing one
parameter will affect the other. If you enable the adaptive "TEMPO" feature
in the Live Adapt menu, this parameter will adapt within a range around the
currently set TEMPO setting. When adaptive TEMPO is enabled, the Adapt
A
icon will appear next to this parameter and the LCD display will show the
adapted tempo as it changes. For information on using Live Adapt, see "Live
Adapt" on page 15.
To dial in the Delay effect:
1. Sing into the microphone (or use the Sound Check feature, see "Sound Check"
on page 14).
2. Ensure the AMOUNT parameter is set high enough to hear the effect.
3. Select the desired Delay TYPE using the <DATA> encoder.
4. Adjust the TEMPO parameter to match the tempo of the song (this step is not
necessary when using slap delays).
5. Adjust the SPEED parameter until you achieve the "feel" you are after.
6. Adjust the REPEATS parameter until the desired length of delay repeats is
achieved.
7. Fine tune the AMOUNT parameter until the desired effect balance is achieved.
8. If you want the TEMPO parameter to adapt as the music tempo changes, enable
the adaptive "TEMPO" feature in the Live Adapt menu. For information on using
Live Adapt, see "Live Adapt" on page 15.
56
Owner's Manual