Vocal Effects - DigiTech Vocalist Live FX Owner's Manual

Vocal Effects

The "Vocal" effects processing section comes after the Gold Channel effects
processing section and comprises the following 7 effect modules: Pitch FX,
Distortion/Filter, Harmony, Double, Modulation, Delay, and Reverb. Unlike the Gold
Channel effects, Vocal effect settings are independently stored to each preset.
To bypass/enable a Vocal effect module:
1. Press the corresponding effect button (e.g., <Pitch FX>, <Dist/Filter>,
etc.). When the effect button is lit, the corresponding effect is enabled. When
the effect button is not lit, the corresponding effect is bypassed.
2. If you wish to store the Vocal effect's newly enabled or bypassed state, press the
<Store> button and perform the preset storing procedure. See "Presets" on
page 20 for further information on storing user presets.
To edit Vocal effect settings:
1. Press and hold the effect button for the effect which you would like to edit (e.g.,
<Harmony>, <Modulation>, etc.). The effect button will begin flashing and
the LCD display will now display the selected effect's parameters.
2. Start singing into the microphone or use the Sound Check feature (see "Sound
Check" on page 14 for further information). Turn the corresponding <Edit>
knobs to adjust the various parameters for the effect. Some effects have
multiple effect "Types" to select from (for example, Modulation has chorus,
flange, etc.). For these effects, turn the <DATA> encoder to change the effect
Type.
3. When finished, press the flashing effect button to exit the effect's Edit mode.
4. To store the changes, press the <Store> button and perform the preset
storing procedure. See "Presets" on page 20 for further information on
storing user presets.
Vocal effects Bypass
The Live FX contains a global Bypass function, which allows you to bypass all Vocal
effects within the currently loaded preset. The Bypass function does not bypass the
Gold Channel effects. This is a useful feature which can be used to bypass the Vocal
effects when speaking to the audience between songs or when you wish to sing only
through the Gold Channel effects.
To bypass/enable all Vocal effects:
1. Press and hold the <Up> footswitch. The LED above this footswitch will light
and "EFFECTS BYPASSED" will appear in the LCD display.
2. Press any footswitch or effect button to exit Vocal Effect Bypass mode and re-
enable the Vocal effects.
12
Owner's Manual