DigiTech Vocalist Live FX Owner's Manual page 55

Note: The Harmony KEY parameter can not be edited when adaptive
HARMONY is enabled in the Live Adapt menu (see "Live Adapt" on page
15). However, when Pitch FX is configured to receive its KEY setting
from the Harmony KEY setting, you will still have access to changing the
KEY parameter for the sake of Pitch FX, but doing so will not affect the
Harmony KEY as it is set for adaptive operation.
• HUMANIZE (0-99)
This parameter adjusts the timing of the harmony voices to make them sound
more realistic and more distinct from the source signal, with 0 being the
minimum (harmonies are perfectly timed with the lead voice) and 99 being the
maximum (harmonies are very loosely timed with the lead voice).
• GENDER (0-99)
This parameter is used to amplify the natural gender that is applied to the
harmony voices. As GENDER is turned from 0 to 99, voices shifted up will
sound more female, and voices shifted down will sound more male.
To dial in the Harmony effect:
1. Sing into the microphone (or use the Sound Check feature, see "Sound Check"
on page 14) and ensure the AMOUNT parameter is set high enough to hear
the effect.
2. Select the KEY option which matches the key of the song. If you want the
Harmony KEY to adapt as the music changes, enable the adaptive "HARMONY"
feature in the Live Adapt menu. For information on using Live Adapt, see "Live
Adapt" on page 15.
3. Using the <DATA> encoder, select the desired harmony voicing TYPE.
4. Adjust the HUMANIZE parameter until the desired amount of distinction and
realism is achieved.
5. Adjust the GENDER parameter to determine the amount of gender effect to
apply to the harmony voices.
6. Now that the parameters are dialed in, fine tune the AMOUNT parameter until
the desired effect level is achieved.
Owner's Manual 49