Cisco Linksys E1000 User Manual page 15

Linksys E1000
WPA Personal
NOTE: If you select WPA Personal as your
Security Mode, each device in your wireless
network MUST use WPA Personal and the same
passphrase .
Wireless Security > WPA Personal
Passphrase
Enter a passphrase of 8-63 characters . The
default is password .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .
WPA2/WPA Enterprise Mixed Mode
This option features WPA2/WPA used in coordination with
a RADIUS server . (This should only be used when a RADIUS
server is connected to the Router .)
NOTE: If you select WPA2/WPA Enterprise Mixed
Mode as your Security Mode, each device in
your wireless network MUST use WPA2/WPA
Enterprise and the same shared key .
WPA2/WPA Enterprise Mixed Mode
RADIUS Server
Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS
server . The default is 1812 .
Shared Secret
Enter the key shared between the Router
and the server .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .
Wireless-N Router
Chapter 2: Advanced Configuration
WPA2 Enterprise
This option features WPA2 used in coordination with a
RADIUS server . (This should only be used when a RADIUS
server is connected to the Router .)
NOTE: If you select WPA2 Enterprise as your
Security Mode, each device in your wireless
network MUST use WPA2 Enterprise and the
same shared key .
WPA2 Enterprise
RADIUS Server Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS
server . The default is 1812 .
Shared Secret
Enter the key shared between the Router
and the server .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .
13