Copying Images Using Infrared Communication [Irtran-P] - JVC GR-DVX7 Instructions Manual

78
EN
MENU/SET Dial
Power Switch
Rewind (2)
Button
Infrared transmitter/receiver
15
15
Lock Button
Power lamp
Fast-Forward
(3) Button
15
< 50 cm
15
Copying Images Using Infrared
Communication [IrTran-P]
Images stored in a MultiMediaCard can be copied
between this camcorder and another piece of equipment
that supports IrDA (IrTran-P) infrared communication,
regardless of its manufacturer.
The following procedure is described using two
GR-DVX7 camcorders as an example. For use of other
video units, refer to their respective instructions.
1
LOAD MULTIMEDIACARDS
[For both receiving and transmitting camcorders]
Insert MultiMediaCards into both receiving and
transmitting camcorders.
2
SELECT OPERATION MODE
[For both receiving and transmitting camcorders]
Set the Power Switch to "
down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.
3
ACCESS PLAYBACK MENU
[For both receiving and transmitting camcorders]
Press MENU/SET. The Playback Menu appears.
4
SELECT FUNCTION
[For both receiving and transmitting camcorders]
Rotate MENU/SET to move the highlight bar to
"IrTran-P" and press it. The selected parameter blinks.
5
SELECT IrTran-P MODE
[For transmitting camcorder]
Rotate MENU/SET until "TRANSMIT" appears and
press it. The normal playback screen appears.
6
SELECT IMAGE TO BE COPIED
[For transmitting camcorder]
Perform Index Playback (
( pg. 56) or press 2 or 3 to select the desired
image.
DUBBING
(cont.)
" while pressing
pg. 59), Auto Playback