Charge Your Portable Charger - Nokia DC-19 User Manual

Universal portable usb charger
Hide thumbs Also See for DC-19:
Table of Contents

Advertisement

Charge your portable charger

The built-in battery has been partially charged at the factory, but you may need to recharge it before
you can use your portable charger.
Charge your portable charger in the correct temperature: 0°C – +45°C. If the temperature is outside
this range, all the indicator lights blink fast, and your portable charger stops charging.
1. Plug a compatible USB charger (sold separately) into a wall outlet, or connect the USB end of the
cable CA-189CD to a computer.
2. Connect the micro-USB end of the cable CA-189CD to the charger connector of your portable
charger.
The indicator lights switch on and 1 indicator light blinks steadily while the battery is charging, showing
you the progress. When the battery is fully charged, all the indicator lights switch on for 10 seconds.
3. When the battery is full, disconnect the compatible USB charger from your portable charger, then
from the wall outlet.
When you unplug a charger, hold and pull the plug, not the cord.
Check the battery level
Press the power indicator key. The indicator lights switch on for 10 seconds, showing you the
remaining battery level. Each indicator light represents 25% of the battery capacity.
If the battery is empty or low, the first indicator light blinks fast.
You can also check the battery level when disconnecting the charging cable from your portable
charger.
6
© 2013 Nokia. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents