Bluetooth Mobile Phone; Connecting To Jvc Original Application; Deleting Registered Device - JVC KD-X50BT Instructions Manual

Connecting to JVC original
application
JVC original application is designed to view JVC
car receiver status and perform simple control
operations on Android smart phones.
For JVC original application operations, visit JVC
website:
<http://www3.jvckenwood.com/english/car/
index.html> (English website only).
1
(Hold)
2 Select <CONNECT>.
3 Select the desired smart phone.
"CONNECTED" "[Device Name]" scrolls on the
display when the device is connected.
4 Press MENU to exit.

Bluetooth mobile phone

Receiving a call
To receive a call
When there is an incoming call, the source
automatically changes to "BT FRONT"/"BT REAR".
"RECEIVING" appears on the display, followed
by the phone number or name.
The display flashes in blue. (
or
You can also press / / / /SOURCE on the
remote control to answer a call.
When <AUTO ANSWER> is set to <ON>, the
unit answers incoming calls automatically.
( page 16)
<BLUETOOTH>
<APPLICATION>
<CONNECT>
page 16)
Bluetooth connection
Deleting a registered device
1
(Hold)
2 Select <DELETE YES>.
"DELETED" appears when the device is deleted.
3 Press MENU to exit.
To end a call
(Hold)
You can also press and hold
on the remote control to end a call.
To deactivate/activate hands-free
mode
During a phone conversation...
Operations may vary according to the
connected Bluetooth device.
<BLUETOOTH>
<DELETE PAIR>
[Device name]
<DELETE YES>
or (Hold)
/ / / /SOURCE
ENGLISH | 13