Remote Controller - JVC KD-X50BT Instructions Manual

Display information
Changes the display information. (Press)
Scrolls the current display information. (Hold)
Source
Radio
USB/Bluetooth Audio
iPod/iPhone (HEAD MODE/
IPOD MODE)
iPod/iPhone (APP MODE)
External Components (AUX)
* "NO NAME" appears if no name is assigned to the station.

Remote controller

Preparing
When you use the remote controller for the first
time, pull out the insulation sheet.
Insulation sheet
Replacing the lithium coin
battery
If the effectiveness of the remote controller
decreases, replace the battery.
Caution:
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
Station name* Frequency
Album title/Artist Track title
Track no./Clock (back to the beginning)
APP MODE APP/Clock
AUX IN Clock
CR2025
This unit is equipped with the steering wheel
remote control function. For details, refer also to
the instructions supplied with the remote
adapter.
Display
Clock (back to the beginning)
Track no./Playing time
Warning:
Do not install any battery other than CR2025 or
its equivalent.
Do not leave the remote controller in places
(such as dashboards) exposed to direct
sunlight for a long time.
Store the battery in places out of reach of
children.
Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
Do not place the battery with other metallic
materials.
Do not poke the battery with tweezers or
similar tools.
Insulate the battery by wrapping it with tape
when disposing or storing it.
Basic operations
ENGLISH | 5