Assembly - Healthrider H450I User Manual

Healthrider treadmill user manual
Table of Contents

Advertisement

AssembJy r equirestwo persons.Setthetreadmill ina cbaredareaandremove allpacking materials, Donot
disposeof the packingmatedaJs u ntil assemMy is completed.
Note:Theunderside o fthetreadmill walking beltiscoated withhigh@erformance
lubricant, During shipping, a
small a mount o f lubricant maybetransferred t othetopofthewalking beltortheshipping carton, T hisis a normal
condition anddoesnotaffecttreadmill performance, if thereis lubricant ontopofthewalking belt,simply wipeoff
thelubricant witha softclothanda mild,non-abrasive cleaner,
E
Assembly
requires
the included
hex key
_ and your own phillips
screwdriver
Use the drawings below to identify the hardware used during assembly, Note: if a part is not in the parts bag,
check to see if it has been preattached
to one of the parts to be assembled.
To avoid damaging
plastic
parts, do not use power tooJs for assemMy.
3/4" Screw (23)-6
0
3/8" Star
Washer (83)-4
1" Tek Screw (77)-4
©
Pulse Bar Star
Washer (65)-4
Endcap Screw
(79)-2
1 1/4" Tek Screw (108)-2
Silver Pulse Bar
Screw (64)-4
< 38
Cover Screw (52)-4
Console Screw (67)-4
2 3/4" Upright Bolt (85)-2
1" Upright Bolt (84)-2
1 1/4" Bolt (63)-4
1, Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side as shown, Partially
fold the Frame (26) so that the treadmill is more
stable, Do not fully fold the Frame until the
treadmill
is completely
assemMed.
identify the Right Upright (76) which has a
RIGHT sticker, Hold the Right Upright near the
Base (81), insert the Upright Wire (75) into the
Right Upright until the Upright Wire is extending
from the upper end of the Right Upright, Note:
Make sure that the Upright Wire is extending
from the side of the post as shown in the inset
drawing, Remove the tie from the Upright Wire,
Thread a 2 3/4" Upright Bolt (85) and a 1" Upright
Bolt (84) with 3/8" Star Washers (83) into the
Base (81) and the bottom of the Right Upright
(76), Do not tighten the Upright Bolts yet,
76
26
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro h450iHrtl61706.1

Table of Contents

Save PDF