Product Views; Front View Of The Drive; Back View Of The Drive - IBM 48X User Manual

v Keep the CD-RW drive in its antistatic bag until you are ready to install the
v Do not force insertion of the power cable. Doing so might damage the connector

Product views

The following sections illustrate the front and back views of the CD-RW drive.

Front view of the drive

Refer to the following illustration to identify parts that might be referred to in the
installation instructions.
Note: Front bezel design might be different (varies by supplier).
plays a CD.
a CD from the drive when normal ejection procedures do not work.

Back view of the drive

Refer to the following illustration to identify parts that might be referred to in the
installation instructions.
adapter.
computer power supply cable.
drive in your computer. Limit your movement. Movement can cause static
electricity buildup.
or the drive.
1 Busy indicator: This light comes on when the drive reads from, writes to, or
2 CD tray: Use this tray to load and unload a CD.
3 Manual-eject hole: This hole provides access to the eject mechanism to remove
4 Eject/Load button: When pushed, this button opens or closes the CD tray.
1 Reserved
2 Audio-out connector: Use this connector to attach the CD-RW drive to a sound
3 Configuration pins: These pins are used to set the drive configuration.
4 IDE connector: Use this connector to attach the CD-RW drive to the IDE cable.
5 DC-power connector: Use this connector to attach the CD-RW drive to the
ReWriteable
Installation and user's guide
3