Table of Contents
Advertisement
Door Reversal
The direction in which the door swings opens may be changed. Hinges are attached to the right-hand side
of the door when the product is shipped from the factory. The ice maker is designed so that the hinges
may be installed on either side. If the hinges are moved to the holes on the left-hand side, the door will
open to the left.
① Loosen the anchor
screws on the lower hinge
of the door and remove
the door.
④ Remove the anchor
screws on the upper hinge
bracket and place the hinge
into the hole on the left.
⑦ Turn the separated upper
panel inside out and put it
on the upper hinge and
upper cover hinge bracket.
② Remove the anchor screws
on the lower hinge and insert
the hinge into the hole on the
left.
⑤ Put the upper cover hinge
bracket in the right-hand hole.
⑧ Place the door on
the upper hinge and
lower hinge and fasten
the anchor screws of
the lower hinge.
13
③ Loosen the anchor
screws on the upper
hinge and upper cover
hinge bracket and
remove the upper panel.
⑥ Move the "L" shaped
door hinges of the upper
and lower parts of the
door to the left.
⑨ Check the movement of the
door by opening and closing it.
Advertisement
Table of Contents
