Table of Contents
Advertisement
8. Product Installation
Important Information! Turn on the tap and check for
any leakage at the connection.
The user does not need to fill the container with water. The first
batch of ice should be discarded. Ice production requires 1-2
hours.
Leveling Legs
Turn the legs counterclockwise to raise the product, or
clockwise to lower it.
CAUTION
Do not cover the kick plate/grill parts.
The ice maker is ventilated through the front ventilation panel.
Fig. 8 Air Hose Joint
A decorative door panel may be installed but the ventilation
holes of the kick plate/grill must not be blocked.
The kick plate/grill may be painted in another color. Follow the
simplified steps outlined below.
1) Smooth the painted surface using fine sandpaper.
2) Scrub the surface until it is clean and dry using rubbing
alcohol.
3) Use a machinery or industrial oil base or gloss enamel paint.
12
Advertisement
Table of Contents
