Kenmore 122.16435010 Use & Care Manual page 11

Installing Gas Tank Heat Shield
1. Assemble the 2 longer pieces gas of the tank heat
shield bracket A to gas tank heat shields using (2) 5/32
x 8mm Phillips head screws with (2) 5/32 lock washers
from up to down (Fig. 16 A)
2. Assemble the 2 shorter pieces of the gas tank heat
shield bracket B to gas tank heat shields as above, but
assembly screws need to from down to up, finish
preassembling the complete gas tank heat shield (Fig.
16 B).
3. Attach gas tank heat shield bracket A other end to
back panel using (2) 5/32 x 8mm Phillips head screws
with (2) 5/32 lock washers as shown (Fig. 17)
4. Attach gas tank heat shield bracket B to cart frame
using (2) 5/32 x 8mm Phillips head screws with (2) 5/32
lock washers as shown (Fig. 18)
Installing grease cup
From the back, pull out grease tray, remove any
packaging materials from it, then replace grease
cup into grease tray as shown in (Fig. 19). Push
grease tray back into grill.
Figure 16
B
A
11
Figure 17
Figure 18
Figure 19