Dolby Pro Logic Ii Decoder - Toshiba SD-43HT Owner's Manual

Dolby Pro Logic II decoder

Dolby Pro Logic II
Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over
conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, but
also regular stereo sources into five channels (front left/right, center and surround left/right). In addition,
various parameters can be set according to the type of source and the contents, so you can adjust the
sound field with greater precision.
1
Press the Function button on the front panel to select the desired function.
• Select from FM © AM © DVD © DIGITAL IN © AUX 1 © AUX 2.
2
Press the PL II button.
•
Each time the PL II button is pressed.
PRO LOGIC
L R
PRO LOGIC II : Left, Center, Right,
Subwoofer and
Surround(Left, Right)
Channels
L R
STEREO : Left, Right and Subwoofer Channels
37
3
Press the PL II MODE button.
•
Each time the PL II MODE button is pressed.
PRO LOGIC
L R
PRO LOGIC
L R
PRO LOGIC
L R
PRO LOGIC
L R
Pro Logic II Mode
Select one of the modes ("CINEMA", "PRO LOGIC", "MATRIX" or "MUSIC").
•
The Music mode is recommended when listening to CDs or watching DVDs with
mostly musical content.
•
The Cinema mode is best when watching movies.
•
The Pro Logic mode offers the same surround processing as original Pro Logic
and is best used when the source contents are not of optimum quality.
•
The Matrix mode is useful for when the audio is mono.
•
Note When playing a DVD encoded in two or more channels, DOLBY PRO LOGIC II
mode cannot be selected.
38