Dolby Pro Logic Ii Decoder - Toshiba SD-43HK Owner's Manual

Dolby Pro Logic II decoder

Dolby Pro Logic II
Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over
conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, but
also regular stereo sources into five channels (front left/right, center and surround left/right). In addition,
various parameters can be set according to the type of source and the contents, so you can adjust the
sound field with greater precision.
1
Press the Function button on the front panel to select the desired function.
•
Select from FM AM DVD
2
Press the PL II button.
•
Each time the PL II button is pressed.
PRO LOGIC
L C R
LFE
LS RS
PRO LOGIC II : Left, Center, Right,
Subwoofer and
Surround(Left, Right)
Channels
L R
LFE
STEREO : Left, Right and Subwoofer Channels
Pro Logic II Mode
Select one of the modes ("CINEMA", "PRO LOGIC", "MATRIX" or "MUSIC").
•
The Music mode is recommended when listening to CDs or watching DVDs with mostly
musical content.
•
The Cinema mode is best when watching movies.
•
The Pro Logic mode offers the same surround processing as original Pro Logic and is
best used when the source contents are not of optimum quality.
•
The Matrix mode is useful for when the audio is mono.
37
DIGITAL IN AUX 1 AUX 2.
3
Press the PL II MODE button.
•
Each time the PL II MODE button is pressed.
PRO LOGIC
L C R
LFE
LS RS
PRO LOGIC
L C R
LFE
S
PRO LOGIC
L C R
LFE
LS RS
PRO LOGIC
L C R
LFE
LS RS
Dolby Pro Logic II Effect Function
This function works only in Dolby Pro Logic MUSIC mode.
1
Press PL II MODE button to select
'MUSIC' mode.
PRO LOGIC
TITLE PBC CHAP PRGM RDS RT TA ST TUNED
LINEAR PCM
L C R kHz
LFE MHz
LS RS
3
Press PL II EFFECT button and then
press Left/Right ( / ) buttons to
select the next mode.
•
You can select between 0 and 7.
PRO LOGIC
TITLE PBC CHAP PRGM RDS RT TA ST TUNED
LINEAR PCM
L C R kHz
LFE MHz
LS RS
•
PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
•
CENTER WIDTH: Sound is output to the center speaker only.
The front left and right speakers produce phantom sound.
•
DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
•
When playing a DVD disc encoded with two or more channels, multi-channel mode will be
Note
selected automatically and (Dolby Pro Logic II) button does not work.
2
Press PL II EFFECT button and
then press Left/Right ( / ) buttons
to select the mode.
•
You can select either 0 or 1.
PRO LOGIC
TITLE PBC CHAP PRGM RDS RT TA ST TUNED
LINEAR PCM
L C R
kHz
LFE MHz
LS RS
4
Press PL II EFFECT button and
then press Left/Right ( / )
buttons to select the next mode.
•
You can select between 0 and 6.
PRO LOGIC
TITLE PBC CHAP PRGM RDS RT TA ST TUNED
LINEAR PCM
L C R kHz
MHz
LFE
LS RS
38