Gigabyte GA-34SGCM-S2 User Manual page 68

STEP 2:
In the Audio Control Panel, click the A u d i o I/O tab.
In the upper left list, click 8CH Speaker.
STEP 3:
Connect the 8-channel speakers to the audio jacks
on the motherboard and the surround cable, a
small window will pop up and ask you what type
of equipment is connected. Choose a device de-
pending on the type of speaker connected (8-
channel audio consists of Front Speaker Out (Line
Out), Rear S p e a k e r Out, C e n t e r / S u b w o o f e r
Speaker Out, and Side Speaker Out) then click
OK. The 8-channel audio setup is completed.
S o u n d E f f e c t C o n f i g u r a t i o n :
At the Sound Effect menu, users can adjust sound
option settings as desired.
A C ' 9 7 A u d i o C o n f i g u r a t i o n :
To enable the front panel audio connector to sup-
port AC97 Audio mode, go to the Audio Control
Panel and click the A u d i o I/O tab. In the A N A -
LOG area, click the Tool icon and then select the
Disable f r o n t panel j a c k d e t e c t i o n check box.
This action completes the AC'97 Audio configuration.
1 ConnMoi fellings >
1 _
Connector Settings
Г a
г
rtponeljort deletion
GA-945GCM(X)-S2 Motherboard
- 68 -