Turning The System On; Turning The System Off - Toshiba e-studio 353 User Manual

SET UP & START UP

Turning the System On

Turning the System Off

Overview of Copier Components
Overview of Operator Panel
Overview of Operator LCD Display
BASIC
EDIT
IMAGE
E-FILING/FILE
SETTINGS
Turning the System On
1. Open the switch cover, and then turn ON the power
switch. Wait Warming Up appears on the Basic screen
on the touch panel.
2. About 20 seconds later, the equipment will be ready.
READY appears on the Basic screen.
Turning the System Off
When turning off the power of the equipment, perform the following shutdown procedure.
DO NOT turn off the power by switching off the power switch of the equipment as it can cause
the failure of the hard disk. Before turning off the power, be sure that the following 3 conditions
are satisfied: (1) No jobs are left in the printing job list. (2) The ERROR lamp is not blinking.
(3) No PCs access the equipment via network.
1. Press the USER FUNCTION button on the control panel.
2. Press the USER button to enter the user setting menu, and
then press the SHUTDOWN button.
3. Processing job will be deleted. Are you sure you want to
shutdown? appears on the screen. Press the YES button.
4. Shutdown in progress appears on the screen, and then the
equipment is shut down.
Page 1