Identification Of Controls; Front Panel; Rear Panel - Toshiba BDX2700KU Owner's Manual

ntijication ofControls
7 5 6
.
~
4
I I
3 2 1
II
~.~
II •
""============iI
Front panel
1. Disc tray
2. OPEN/CLOSE
~
button
3. Display
• Refer to "Front Panel Display" on page 10.
4. Remote sensor
5. STOP. button
6. PLAY
~
button
7. ON/STANDBY indicator
8. SO card slot
9. ON/STANDBY button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you must
unplug the AC power cord.)
8 9
How to Power On Your Unit?
1. Connect to a standard AC outlet to supply power to this
unit, the ON/STANDBY indicator lights.
2. Wait about 20 seconds and the ON/STANDBY indicator
will be off automatically.
3. After 10 seconds, press ON/STANDBY button to turn
on the unit. The ON/STANDBY indicator illuminates and
display lights.
Rear panel
1 2 3 4 5 6
1. AC power cord
• Connect to a standard AC outlet to supply power to this
unit.
• Unplug this cord from the AC outlet to completely turn
off the unit.
2. LAN terminal
• Use to connect a network equipment with LAN cable.
3. HDMI OUT jack
• Use to connect a TV with an HDMI compatible port via
an HDMI cable.
4. OPTICAL jack
• Use to connect an AV receiver / amplifier, Dolby Digital /
DTS decoder or other device with a digital audio optical
input jack using a digital audio optical cable.
5. COMPONENT VIDEO OUT jacks
• Use to connect a TV with component video inputs using
a component video cable.
6. MULTI CHANNEL AUDIO OUTPUT jacks
• Use to connect an AV receiver / amplifier with a audio
cable.
7. USB jack
• Use to connect USB flash drives (not included).
8. AUDIO OUT jacks
• Use to connect a TV, an AV receiver / amplifier or other
device with a composite audio cable.
9. VIDEO OUT jack
• Use to connect a TV, an AV receiver or other device with
a composite video cable.