Identification Of Controls; Front Panel; Rear Panel - Toshiba BDX2500KU Owner's Manual

Identification of Controls

Front panel

1
5
1. Disc tray
2. OPEN/ClOSE button
3. Display
• Refer to "Front Panel Display" on page 10.
4. Remote sensor
5. STOP button
6. PlAY button

Rear panel

1
AC IN
1. AC power cord
• Connect to a standard AC outlet to supply power to this
unit.
• Unplug this cord from the AC outlet to completely turn
off the unit.
2. lAN terminal
• Use to connect a network equipment with LAN cable.
3. HDMI OUT jack
• Use to connect a TV with an HDMI compatible port via
an HDMI cable.
4. OPTICAl jack
• Use to connect an AV receiver / amplifier, Dolby Digital /
DTS decoder or other device with a digital audio optical
input jack using a digital audio optical cable.
2
2 3 4 5
COMPONENT VIDEO OUT
Y P P
B R
BITSTREAM / PCM R L
VIDEO
HDMI OUT OPTICAL
LAN USB AUDIO OUT
OUTPUT
7 8 9
3 4
7. ON/STANDBY indicator
8. SD card slot
9. ON/STANDBY button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you must
unplug the AC power cord.)
6
SBL C SL FL
SBR SW SR FR
MULTI CHANNEL AUDIO OUTPUT
5. COMPONENT VIDEO OUT jacks
• Use to connect a TV with component video inputs using
a component video cable.
6. MUlTI CHANNEl AUDIO OUTPUT jacks
• Use to connect an AV receiver / amplifier with a audio
cable.
7. USB jack
• Use to connect USB flash drives (not included).
8. AUDIO OUT jacks
• Use to connect a TV, an AV receiver / amplifier or other
device with a composite audio cable.
9. VIDEO OUT jack
• Use to connect a TV, an AV receiver or other device with
a composite video cable.
5 6 7
8 9
7