Page 3
The Classic re-issue series is a tribute to the guitar pedals that paved the way for TC Electronic’s success of today. So what would be more obvious than to entitle this series “CLASSIC”?
OPERATION OPERATION Notch settings will attenuate frequencies around the Freq Center. Peak Audio Connections settings will emphasize the selected frequency area. Input - 1/4” connection for input signal. Connect your guitar here. High Q - The “Q” value switch allows you to alternate between two Output - 1/4”...
SPECIFICATIONS CLASSIC BOOSTER + DISTORTION Connections 1/4 inch input jack, 1/4 inch output jack, This boost was made for rocking. Close encounters with thousands of DC jack 2mm (center is minus) foot soles, millions of miles on the road and a history of being kicked and trod on, this pedal, if any, has truly earned its claim for fame.
Page 6
OPERATION OPERATION Audio Connections Treble - Adding boost or distortion to a sound always changes the perceived amount of treble. Use the Treble control to adjust the amount Input - 1/4” connection for input signal. Connect your guitar here. of high-end frequencies in the sound. Output - 1/4”...
TECHNICAL SPECIFICATIONS CLASSIC TCXII PHASER The swirly effect from the sixties that just keeps popping up in all kinds Connections 1/4 inch input jack, 1/4 inch output jack, DC jack of genres and productions. From acid rock over early hard-rock to funky 2mm (center is minus) beats of the seventies and further to the many contemporary styles that really know their roots;...
Page 8
OPERATION TECHNICAL SPECIFICATIONS Connections 1/4 inch input jack, 1/4 inch output jack, DC jack Audio Connections 2mm (center is minus) Input - 1/4” connection for input signal. Connect your guitar here. Power Supply 9-12 Vol DC or battery 9V Alkaline. Output - 1/4”...
Need help?
Do you have a question about the Classic Pedals and is the answer not in the manual?
Questions and answers