Table of Contents
Advertisement
4
Single-Frequency (Simplex) Operation
Single-frequency operation (also known as simplex) is a special case of
switched-carrier operation. Single frequency operation is automatically
selected whenever the transmit and receive frequencies are set to the
same value. Simplex mode results in slower polling because the TX syn-
thesizer must move off the RX channel to receive, and back to transmit.
Single-frequency operation is useful for peer-to-peer communication
using omni-directional antennas with radios in close proximity to each
other.
1.3 Model Number Codes
The radio model number is printed on the end of the radio enclosure and
provided through the software command
key information about how the radio was configured when it was
shipped from the factory. This number is subject to many variations
depending on what options are installed, and in which country the
product is used. Contact GE MDS if you have questions on the meaning
of the code.
1.4 Contents of Standard Shipping Packages
Table 1
and
Table 2
list the content of routine shipments of
MDS 4710/9710 transceivers. The contents might be modified to reflect
customer requirements specified at the time the order was placed.
Table 1. Standard—Accessories (Supplied with All Orders)
Item Description
Transceiver Power Cable Assembly
12 Vdc, (UL-Approved)
Cable, TELCO-Type, 84", RJ12 to RJ12
Radio Configuration Software for Windows OS
Installation & Operation Guide
Connector, RJ-11 to DB-9 (Female)
Table 2. Items Supplied with Diagnostic Option
Item Description
InSite 6 Network Diagnostics Software (CD-ROM)
InSite Network Diagnostics Manual
MDS 4710/9710 Technical Manual
(Page
28). It provides
MODEL
GE MDS Part Number
03-1846A02
03-2198A05
03-3156A01
05-3305A01
73-2434A02
GE MDS Part Number
03-3533A01
05-3467A01
MDS 05-3305A01, Rev. E
Hide quick links:
Advertisement
Table of Contents
