Setting The Fan - Honeywell VisionPRO Series User Manual

Setting the fan

FAN
1 Touch to display fan settings.
2 Touch On, Auto, Circ, or Follow Schedule.
Done
3 Touch to save and exit.
On: Fan is always on.
Auto: Fan runs only when the heating
or cooling system is on.
Circ: Fan runs randomly about 35% of
the time (residential use only).
Follow Schedule: Fan controlled by
program (see pages
69-2761EFS—03
– ).
8 12
6
On Auto Circ
NOTE:
In commercial use,
touch Auto or On to temporarily
override the programmed fan
schedule.
MCR34096
MCR34097