Using The Massage; Using The Usb - Brookstone Shiatsu Bed Lounger User Manual

UsIng THe Massage

Important: This unit is equipped with an adapter—use this adapter only
with this massager .
1 . Connect one end of the adapter to an electrical outlet and the
other end to the Adapter Jack .
2 . Press the
The massage will turn on in low speed .
3 . Press the H/L button to toggle between high and low speed massage .
4 . Press the
nodes .
5 . Use the backrest cushion over the massage nodes to create a less intense
massage experience .
6 . Flip the backrest cushion up off the massage nodes to intensify
the strength of your massage experience .
7 . Use the pockets to store the TV remote, your eReader, etc!
8 . Press the
Note: Massage automatically shuts off after 20 minutes .

UsIng THe Usb

The massager will also power and charge any 5V/2 . 5 A USB powered device
while it's plugged in . Simply plug the USB cable that came with your device
into the USB port .
button on the Control Panel to turn on the massage .
button to alternate between rotation directions of the massage
button to shut the massage off .
6