Adjusting2D To 3D Depth; Switching Left Andrightimages; Tuning Channels; Tuning To The Nextprogrammed Channel - Toshiba 58L7350U User Manual

2 Basicfeatures
Tuning Channels
2 Select 3D > 3D Important Info.
Read through the information.
3 Press the "_/1_ (arrow) buttons to select Yes or No and press the OK
button.
Adjusting2D to 3D depth
With this feature, you can adjust the level of 3D depth.
Within the Menu:
1 Press the SETUP button.
2 Select 3D > 2D to 3D Depth and press the OK button.
3 Press the "_/1_ (arrow) buttons to select either 1, 2, 3, 4, or 5, and
press the OK button.
Within the Quick menu:
1 Press the QUICK button in 2D to 3D mode.
2 Select 3D Settings > 2D to 3D Depth.
3 Press the "_/1_ (arrow) buttons to select either 1, 2, 3, 4, or 5, and
then press the OK button.
Switching left andrightimages
The left and right eye shutter timing of the glassescan be swapped. If 3D
images look blurred, switch the left and right sides of the 3D image.
1 Press the QUICK button to open the Quick menu.
2 Select 3D Settings > Left and Right Image and press the OK
button.
3 Press the A/V (arrow) buttons to select Swapped.
Tuning Channels
Tuning to the nextprogrammed channel
Press the CH ,&/V buttons on the remote control or TV control panel.
Tuning to a specificchannel(programmed or unprogrammed)
Channel." Description:
Analog Usethe0-9 buttonson theremote control.(Forexample, to selectchannel
125,press1,2, 5.),and thenpresstheOK button.
Digital Usethe0-9 buttonson theremote controlto enterthemajorchannel
number. ( andpress theBASH buttonif needed, (Forexample, to select
digitalchannel 1 25- 1,press1,2, 5,-, 1.)),andthenpresstheOK button.