Table of Contents
Advertisement
[DESIGN PRECAUTIONS]
Do not bundle the control lines or communication cables with the main circuit
or power lines, or bring them close to each other.
The distance of 100mm(3.9inch) or more should be ensured.
Failure to do so cause malfunctions due to noise.
Do not power off a station where this module is mounted and do not reset the
PLC CPU while storing the settings into the standard ROM of the module
using a Web browser.
This may make the data unstable within the standard ROM and require
resetting and re-storing, or it may cause a failure or malfunctions of the
module.
[INSTALLATION PRECAUTIONS]
Use the PLC in the environment specified in the user's manual of the CPU
module.
Failure to do so may cause electric shock, fires, malfunctions, product
deterioration or damage.
When mounting the module, fully insert the module fixing projection into the
corresponding fixing hole on the base unit while pressing the module fixing
lever at the bottom of the module.
Incorrect mounting may cause malfunctions, failures or a fall of the module.
The module should be secured with screws in an environment of frequent
vibration.
Be sure to shut off all phases of the external power supply before mounting
or removing the module.
Failure to do so may damage the module.
Tighten the screws within the specified torque range.
Loose tightening may cause a fall, short circuits, or malfunctions.
Overtightening may damage the screws and/or the module, resulting in a fall
of the module, short circuits or malfunctions.
Do not directly touch the conductive part or electronic components of the
module.
This may cause malfunctions or a failure of the module.
For connector wiring, correctly press, pressure-weld or solder the connecting
part by using the tool specified by the manufacturer.
Poor connection may cause short circuits, fires or malfunctions.
Be sure to set the CompactFlash
CompactFlash
Poor contact may lead to malfunctions.
card slot. Confirm it is completely set.
TM
CAUTION
CAUTION
card by pressing it into the
TM
A-2
Advertisement
Table of Contents
