Ringer Melody Selection; Ringer Volume Control; Lcd Contrast; Area Code - Linkcom Link 721 User Manual

Select STORE by following the steps in MENU setting,
[1] The display shows: NAME, enter the name using the alphanumeric keys. If you press the wrong key,
use " " button to correct. Press "OK" key to confirm the name.
[2] Enter the phone number to store. You can use the "
"OK"
key to save the record.
Remarks: The phone has 50 Memories. Each memory can store 14 characters & 24 digits.
Menu function 2: Ringer melody selection
Select RING MELODY by following the steps in MENU setting.
There are 3 ringer melodies pre-stored in your phone.
[1]
melody
[2] After hearing the desired melody, press
Menu function 3: Ringer volume control
Select RING VOLUME by following the steps in MENU setting.
There are 3 ring volume levels (high, medium and low) available on your phone.
[1]
Each level is respectively
or "Down
[2] Press "Up"
"OK"
[3]Press button to save your selection.
Menu function 4: LCD Contrast
Select LCD CONTRAST by following the steps in MENU setting.
[1]There are 5 levels of LCD contrast available.
or "Down
[2] Press "Up"
[3] When you have chosen the most comfortable brightness level, press
selection.
Menu function 5: Area Code
After entering this mode by the above steps in MENU setting,
[1] The display will show "AREA CODE". Press "Yes/Redial" key to confirm
[2] And the "- " will flash, Enter the number to store area code and press "Yes/Redial" key for confirmation.
If you make a mistake, press "
Remark: When you receive a local call, the LCD will only show the telephone number without the area
code. Press the ''Caller list'' to select the local call and press the
number directly.
Menu function 6: Flash Time setting
The phone has only one flash button. It is possible to change it directly from the menu:
Change the flash duration:
1. Press the Menu button and then use "Up" or "Down" button to access to "flash" menu.
2. Press "Down" and "UP" button to change the flash duration. (100ms, 300ms, 600ms, 900ms).
3. Press "OK" button to confirm your selection.
Menu function 7: Date & time setting
Select CLOCK/DATE by following the steps in MENU setting,
[1] The hour displayed on LCD will be blinking.
[2] Enter the desired hour, minutes by using the numeric keypad.
[3] Move the blinking prompt to the date position by pressing "Up" or "Down" button, enter the
desired date.
[4] Press "C" button or just wait until time out, the Settings will be saved automatically
"OK"
button to confirm your selection.
designated by icons
" button to choose desired Ring Volume.
" button to test the different levels of contrast of your LCD display.
" button to correct.
" button again to correct error entry. Then press
Press "Up"
, and
'Yes / Redial'
or "Down
" button to test each
.
"OK"
button to save your
key to dial the telephone
4