Install And Connect TV
2
TV Stand Installation Instructions
1.Open the carton and remove the TV
and assorted accessories and base
(some models without base).
2.To avoid damage to the TV, cover the
table with a soft cloth, towel or bedsheet. Place
TV face down on padding, then fix base of the
neck to the TV with screws.
3.Connect and screw the base into the TV.
4. The installation is now complete.
3
FM ANT
TV ANT
TV signal output
1
Set your TV
Place your TV in a firm place that can
bear the weight of the TV.
To avoid danger, please don't expose the
TV to water or heat sources (such as a close
light, candle, heating ducts). Do not block
the ventilation at the back of TV.
Connect antenna and power
1.Connect the antenna cable to the antenna
socket on the back of the TV.
2.To plug the power cord of TV (AC 100-
240V~ 50/60Hz).
Turn on TV
3.Press the power button of the TV. The
indicator light will turn green. If it is
on standby mode (the light is red), press
the power button on the remote control
to turn on the TV.
Note:
Picture is for reference purposes only.
1
3
2
4
7