Table of Contents
Advertisement
Install And Connect TV
2
TV Stand Installation Instructions
1.Open the carton and remove the TV
and assorted accessories and base
(some models without base).
2.To avoid damage to the TV, cover screen
with a soft mattress, put it on the table face
down on the soft layer, the base of the
neck is fixed on the TV with screws.
3.Screw the base and connections to the TV.
4. The installation is complete.
3
FM ANT
TV ANT
TV signal output
1
Set your TV
To put your TV in a sturdy place which can
bear the weight of the TV.
To avoid danger, please don't expose the
TV to water or hot locations (such as near
lights, candle, heaters). Do not block
the ventilation at the back of TV.
Connect antenna and power
1.Connect the antenna cable to the antenna
socket on the back of the TV.
2.To plug the power cord of TV (AC 100-
240V~ 50/60Hz).
Turn on TV
3.Press the power button of the TV the
indication light will turn to green. If it is
on standby mode (the light is red),press
the power button on the remote control
to turn on the TV.
Note:
Pictures for reference purposes only.
1
3
2
4
7
Advertisement
Table of Contents
