Mitsubishi JC-17W41 User Manual page 12

Group Item
Item
Icon Icon
MOIRE CANCEL LEVEL
(PURITY)
CLAMP PULSE POSITION
FACTORY PRESET
HORIZ-CONVERGENCE
VERT-CONVERGENCE
(CONVER.)
FACTORY PRESET
DEGAUSS
POWER SAVE
(MISC.)
CONTROL LOCK
"BRIGHT" and "CONTRAST" are unavailable at the locked condition.
OSD POSITION
OSD TURN OFF
DIAGNOSIS
LANGUAGE
AUTO SAVE
When selecting "OFF", if "SAVE" is not done before the OSD screen disappeared, the new setting is invalid.
ALL RESET
FACTORY PRESET
A. Press "FACTORY PRESET" to restore to the factory preset level.
B. Press and buttons together, to restore to the factory preset level.
- +
C. Set data does not change by the change of the signal timing.
If a non-Factory Preset timing is used, "FACTORY PRESET" does not work.
Press the Minus Button Press the Plus Button
- +
To decrease the level of the moire-clear wave.
To eliminate an excessive green or white-back ground that may occur
when external sync signals are applied to the monitor.
To clamp the video signal at the To clamp the video signal at the
front of the H-Sync pulse. back of the H-Sync pulse. If you
connect to an older Macintosh, you
may need to press plus button.
To restore to factory preset level.
To adjust the horizontal beam alignment on the full screen area.
To adjust the vertical beam alignment on the full screen area.
To restore to factory preset level.
To eliminate possible color shading
or impurity due to magnetic effects.
To select the power-save mode.
To select the constant power
(Your computer must be set for power
consumption mode.
management.)
To lock the OSD function except
To permit all OSD adjustments.
for "BRIGHT" and "CONTRAST".
To move the OSD screen position To move the OSD screen position
in a counter clockwise direction. in a clockwise direction.
To adjust the time that the OSD screen disappear when no access.
Indicates the current scanning frequency, factory or user preset timing
number, and signal input connector.
To choose the language used on OSD.
ENG.....English, FRA.....French, ESP.....Spanish, GER.....German, JPN.....Japanese
To save the new setting automati-
To save the new setting with a
cally.
confirmation message.
Restores all items to the factory preset level.
To restore to factory preset level.
- 1-9 -

x : Available
A B C
- +
X X
X
- - -
X X X
X X X
- - -
- - -
X X X
X
X X X
X X X
- - -
X
X
- - -
- - -