Rane MS1B Datasheet

DATA SHEET

General Description

The Rane MS 1b Mic Stage pream-
plifier provides the answer when you
need just one microphone input in an
otherwise line-level world. Give us a
call to go from either a dynamic,
condenser or electret microphone to a
line-level input with a minimum of
noise, distortion, cost and hassle.
The MS 1b provides 48 V switch-
able Phantom Power with indicator
LED, continuous rotary Gain trim
between 18 dB and 66 dB, Signal/
Overload LED, and XLR balanced Input
& Output connectors. A Polarity switch
and high-current cross-coupled output
line driver round out the features.
The MS 1b utilizes one of the finest
ultra low noise amplifier designs
available. Featuring a true differential
input with high common-mode rejec-
tion, use of the MS 1b guarantees
performance usually found only in
mixing consoles costing thousands of
times as much. Of course, for all of that
extra money you receive a proportional
increase in KPSI (knobs per square
inch).
Features
• 120 dB dynamic range
• Gain Control
• Signal / Overload Indicator
• Polarity Switch
4 6
2 8
MIN MAX
GAIN SIG/OL
MS 1b
MADE IN U.S.A.
RANE CORP.
POWER
N108
NORMAL INVERT
220mA
CLASS 2 EQUIPMENT POLARITY
• Switchable 48 V Phantom Power
• True differential Input
• Cross-coupled line driver
• UL/CSA/CE and 100/120/230 VAC remote power supply
MICROPHONE STAGE
5.097"
MS 1b
ON
48V PHANTOM POWER
5.805"
LINE OUT MIC IN
MS 1b
MIC
STAGE
0.15"
0.35"
Data Sheet-1