Download Print this page

Advertisement

Quick Links

1. WARRANTY EXPLANATION
Rane offers a limited warranty which covers both parts and labor necessary to repair any
defects in the manufacturing of the MM 12.
The warranty period for the MM 12 is two (2) years, and is determined from either of these two
methods, whichever is longer:
l. Starting from the date of retail purchase as noted on either the sales slip from an
authorized Rane dealer, or on the warranty registration card sent in to the factory,
2.Starting from the date of manufacture which is coded on both the inside and outside of
the MM 12 chassis, in case the sales slip or warranty card is not available.
If you send in the registration card or retain your sales slip as proof of purchase, you will receive
a full two (2) year warranty period from the date of purchase regardless of the date of
manufacture. If you do not send in the registration card ("I forgot.."), or you do not have a sales
slip from an authorized Rane dealer ("My cat ate it.."), the MM 12 will be underwarranty only
within two (2) years from the date of manufacture.
All registered warranties are tracked by SERIAL NUMBER, not by owner. Once your MM 12 is
registered it will be covered the full two (2) years regardless of any change in ownership.
Should you encounter any problems with the MM 12 be sure to contact either your local Rane
dealer or the Rane factory before taking the MM 12 anywhere for repairs. We will help you to
identify and locate any specific malfunctions, possibly avoid needless shipment, or instruct
you as to the speediest method for authorized repair.
If you must send the MM 12 to the factory or warranty station, BE SURE TO INCLUDE THE
FOLLOWING INFORMATION:
1. YOUR COMPLETE NAME AND SHIPPING ADDRESS.
2. THE SERIAL NUMBER OF YOUR MM 12.
3. A COMPLETE DESCRIPTION OF ANY AND ALL PROBLEMS YOU ARE EXPERIENCING
WITH THE MM 12.
Never ship the MM 12 in any shipping carton other than the original or a replacement supplied
by Rane. Ship only by a reputable carrier-we do not recommend parcel post due to a high
incidence of damage or loss. Be sure to insure the package for the full replacement value.
Note: Be sure to remove the MM 12 from any rack or carrying case prior to shipment to the
factory or a warranty station, otherwise you will be charged for the additional time to remove
and reinstall the unit
If you need further assistance concerning the repair, installation or operation of your MM 12
please feel free to contact Rane galactic headquarters at
o r :
Rane Corporation
10802 47th Ave. W.
Mukilteo, WA 98275
Phone: (425)355-6000

Advertisement

loading

Summary of Contents for Rane MM 12

  • Page 1 Rane offers a limited warranty which covers both parts and labor necessary to repair any defects in the manufacturing of the MM 12. The warranty period for the MM 12 is two (2) years, and is determined from either of these two methods, whichever is longer: l.
  • Page 2: Front Panel Description

    II. FRONT PANEL DESCRIPTION...
  • Page 3: Input Gain Control

    Whenever any of the CUE buttons on the MM 12 is pressed, the mains input will be bypassed and you will hear the desired mix in the MM 12. You may also use a stereo l/4” patch cord to connect the Mains Input to any of the input LOOP jacks to achieve input cueing-see the following note for wiring requirements.
  • Page 4 16. MIX LEVEL CONTROLS: Each of these knobs controls the amount of input channel material to be heard in each output mix. Each of the six outputs of the MM 12 has 8 level controls which determine the particular mix for that monitor speaker.
  • Page 5: Installation

    1/4" plugs as necessary on the main mixer end. 2. If you are using a 16 channel main board, bypass the MM 12 as shown with any instrument which has a stage monitor amp, such as electric guitar, bass, etc., since these will not need to be in the monitor system.
  • Page 7 Stage Location of the MM 12 for Dedicated Monitor Mix Operator 1. Run a short snake from a stage box to the inputs of the MM 12; this snake need only be long enough to reach from center stage to the MM 12 location, but is is wise to make it long enough to run it along the edge of the stage out of the way—a 25 foot length would be a minimum.
  • Page 10 8, a second instrument into 8a, a third into 8b and so on. Then adjust the INPUT CAIN controls on channels 8, 8a, 8b, and 8c of the MM 12 such that all of the instruments are of equal volume when monitored in headphones with MlX LEVEL control 8 turned up (you will also have to turn up channel 1 OUTPUT LEVEL control and depress the CUE button just below it).
  • Page 11 As shown in the installation diagrams, be sure to plug the headphone output of the main mixer into the MAINS INPUT of the MM 12 headphone section, using a STEREO 1/4” shielded patch cord. Then plug a single...
  • Page 12 B. USING THE HEADPHONES MAINS INPUT FOR INPUT CUEING. You may use the MAINS INPUT in the headphone section of the MM 12 to verify any input to the MM 12 or make tone adjustments during the performance. 1. Obtain a stereo 1/4" PATCH CORD at least 18” long.
  • Page 13: Specifications

    V. SPECIFICATIONS 12 INPUTS with the following: -Transformerless electronically balanced/unbalanced female three-pin connector input. -Passive MIC splitter with male three-pin connector output. -Built-in RFI filters. -Input impedance: 8k ohms in MIC or LINE. -Active gain control: 20 dB to 70 dB in MIC. 10 dB to 30 dB in LINE. -Maximum input leve!s: +2 dBm (1V) in MIC.