Control Pad Features; Temperature Visual Display; For A Silent Control Panel - Kenmore Double Oven Electric Range Use & Care Manual

Control Pad Features

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various features and functions of the oven as described below. Detailed instructions for each feature and function
follow later in this Use & Care Guide.
NOTICE: The instructions contained in this document only refer to the lower oven operations. These instructions can also
be applied to the upper oven by selecting the upper oven key pad instead of the lower oven pad. Upper or Lower icon
will appear in the display to confirm the chosen oven.
COOK TIME DELAY START PAD— Used
PAD— Used to set the desired start time
to enter the for baking. May be used with
length of the COOK TIME to program a
baking time. delayed timed bake cycle.
CLOCK SET
PAD— Used
to set the
time of day.
Also used
to activate
the cooktop
lockout
feature.
TIMER PAD— Used to set or cancel the
minute timer. The minute timer does not
start or stop cooking.
ADD 1 MINUTE PAD— Used to add 1 minute
to the Timer Countdown. This feature works
with the Kitchen Timer only and does not
affect any cook time or start time functions.

Temperature Visual Display

Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual temperature will be
shown in the display and will rise as the unit preheat. When the unit has reached its target temperature, a chime will
sound to remind you to place the food in the oven. This feature will be active with the modes: BAKE and CONvECTION
(lower oven only).

For a silent control panel:

The DELAY START pad controls the Silent Control Panel feature. The Silent Control Panel feature allows the oven control to
be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation
and later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control operation
1. Press and hold DELAY START pad for 6 seconds. A beep will sound, "-- --" will appear, "DELAY" will flash in the display.
After 6 seconds, a beep will sound and "SP" (speaker) or "- -" will appear in the display.
2. Press or pad to switch between normal sound operation and silent operation mode. If "SP" appears, the control
will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation mode.
3. Wait 5 seconds to accept the change or press STOP pad to reject the change.
Note: The control will always beep at the end of a minute timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.
CLEAN PAD— Used
to select the Self-
Cleaning cycle and
Consumer Defined
Control Features.
UP and DOWN ARROW
WARM &
PADS— Used along
READY
with the function pads to
ZONE PAD—
select oven temperature,
Used to set
cook time, start time
the Warm &
(when programming an
Ready Zone
automatic start time),
feature.
time of day, clean time
and minute timer.
12
BROIL PAD— Used to select the
variable broil function.
BAKE PAD— Used to
select the bake function.
STOP PAD— Used
to clear any function
previously entered except
the time of day and
minute timer. Press STOP
to stop cooking. Also
the STOP pad is used
to activate oven lockout
setting.
WARM PAD— Used
to set the Warm &
Hold feature.
OVEN
INTERIOR
LIGHT PAD—
Used to turn
oven interior
light ON and
OFF.