Default Settings (Set In The Factory) - AEG Milano 10 User Manual

A. Basic appliance
B. Handset
C. Sliding switch for setting the ringer volume (low, middle, high)
D. Handset cable inlet at the base
E. Sliding switch for setting the flash-time (100 or 300 ms)
F. Sliding switch for setting the dialing mode (P= impulse /T=tone)
G. Inlet for the telephone line cord
H. Handset cable inlet at the handset
I. Cable canal for telephone line cord
J. Cable canal for handset cable
K. Cable canal cover / support for wall mounting
L. Bolt for unlocking the support

Default settings (set in the factory)

Dialing mode
Flash – time
Pause
Redial memory
Ringer volume
Shortcut dialing memory empty
This manual is meant for your information. Its contents are no part of
the contract. All values quoted are standard values.
The described equipment and the options can be different, depending
on the requirements of your country. We reserve our right to technical
modifications.
AEG Milano 10_en
tone dialing
300 or 100 ms (depending on your country's version)
3 seconds
empty
high
5