Configuration; Setting The Ringer Volume; Insert A Pause; Setting The Dialing Mode - AEG Milano 10 User Manual

Configuration

Setting the ringer volume

The volume of the ringer can be set to low, medium or high, using the sliding
switch on the side of the appliance. It can also be switched off.

Insert a pause

When you use the telephone connected behind an older PABX, it is possible
that the access code for external calls (generally "0") must be followed by a
pause, before the telephone number may be dialed.
h
Unhook.
n
Enter the access code for external calls.
/P
Press the pause key, the pause is inserted.
n
Enter the telephone number you wish to call.

Setting the dialing mode

Two dialing modes are available:
• MFV (tone):
• IWV (impulse): only necessary for older installations
To set the dialing mode, use the sliding switch (F) on the side of the handset, T
for tone dialing, P for impulse dialing.
8
the actual standard (DTMF mode)
AEG Milano 10_en