Cisco EPC2434 User Manual page 57

Field Name
DMZ Host
(Demilitarized Zone)
IP Address Pass-through
Advanced Networking
Features
VPN Termination
4015258 Rev B
How Do I Configure the Wireless Home Gateway?
Description
Use this page to configure an IP address that is
visible to the wide area network (WAN). DMZ
hosting is commonly referred to as "exposed
host," and allows you to specify the "default"
recipient of WAN traffic that Network Address
Translation (NAT) is unable to translate to a
known local PC.
A DMZ is used by a company that wants to host
its own Internet services without sacrificing
unauthorized access to its private network. DMZ
allows one IP address to be unprotected while
others remain protected. The DMZ is located
between the Internet and an internal network's
line of defense that is a combination of firewalls
and bastion hosts.
Typically, the DMZ contains devices accessible to
Internet traffic, such as Web (HTTP) servers, FTP
servers, SMTP (e-mail) servers, and domain name
system (DNS) servers
Allows the user with network administrator
access to designated MAC addresses of CPE
devices in the private LAN network to be
assigned public IP addresses instead of private IP
addresses.
Note: This link is displayed when the user enters
the Network Administrator User Name and
Password. This link is not displayed during
normal user access.
Allows the user with network administrator
access to enable advanced networking features
including RIP and support for up to 3 routed
subnets on the private network.
Note: This link is displayed when the user enters
the Network Administrator User Name and
Password. This link is not displayed during
normal user access.
Use this page to enable VPN protocols and
manage VPN tunnels.
Note: This link is displayed when the user enters
the Network Administrator User Name and
Password. This link is not displayed during
normal user access.
57