Cisco EPC2434 User Manual page 53

How Do I Configure the Wireless Home Gateway?
Setting Configuration Options
Use the Setup page to access the various configuration options for the wireless home
gateway. Detailed descriptions of each configuration option follow later in this
guide.
Important! After you click the Setup tab, or whenever you access the WebWizard by
typing the 192.168.0.1 IP address into your Web Browser while the gateway is online,
an authentication window similar to the following window opens:
To access the Setup page, leave the user name blank and enter your password. Then
click OK to continue to the Setup page.
Important! If you have not set up a password, leave both the User Name and
Password field blank and click OK to continue to the Setup page.
Note: The gateway ships from the factory without a factory-assigned default
password. See Configuring Your Password Settings (on page 61) for assistance in
setting up your password.
4015258 Rev B 53