Check Drivers (Linux) - HP StorageWorks DAT 72 User Manual
Dat tape drives
Hide thumbs
Also See for StorageWorks DAT 72:
- Quickspecs (15 pages) ,
- Brochure (2 pages) ,
- Troubleshooting manual (65 pages)
Table of Contents
Advertisement
2.
Expand Universal Serial Bus controllers and locate the tape drive.
3.
If the tape drive is connected to the HP USB Mass Storage Device, it is configured correctly. See
Figure
20.
Figure 20
Windows Device Manager, USB controllers
Check drivers (Linux)
Use the following procedure to check that both drivers are present:
1.
usb_storage driver
• At the command prompt type:
lsmod | grep usb_storage
• The output of this command should contain a line similar to:
usb_storage
• If this line is not present, type:
modprobe usb_storage
at the command line to load the usb-storage driver.
61193
0
HP StorageWorks DAT Tape Drives User Guide
43
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the StorageWorks DAT 72 and is the answer not in the manual?