HP StorageWorks DAT 72 User Manual page 19

2. Fit the grommet to the cable. Making sure the Type B connector is facing in towards the tape
drive, slide the grommet into the bracket, as illustrated in
and use the supplied cable ties to tidy up any excess cable.
Figure 9 Connecting USB cable
1
1 Type A connector, to server's
external USB port
2 Type B connector, to tape drive
3. Attach the Type B connector on the cable to the tape drive and the Type A connector to the
server's external USB port, as illustrated in
Figure 9. Fix the bracket to the server
2
Figure 9.
HP StorageWorks DAT Tape Drives User Guide 19