Use Your Speechmike Air; Create A Recording - Philips LFH3010 User Manual

4

Use your SpeechMike Air

This chapter describes how to use the
SpeechMike with Philips SpeechExec dictation
software. If the SpeechMike is used with third-
party software other than Philips SpeechExec,
some features may not be present or function
differently. For detailed information, refer to the
documentation delivered with the software.
4.1

Create a recording

The docking station or the receiver module
1
must be connected to the computer with
the USB cable, and the slide switch must be
in the position.
f
Start SpeechExec dictation software.
2
Move the slide switch to the
3
create a new recording and start speaking.
• The recorder window is displayed.
• The record indicator light glows in red (in
overwrite mode) or green (in insert mode)
while recording.
To stop recording, move the slide switch to
4
the position.
f
Press the
5
• E OL/• • P RIO
recording as finished.
• The dictation file is moved to the
dictations folder.
• The recorder window closes and the work list
window is displayed.
To assign priority status to the recording,
6
press the
• E OL/• • P RIO
a second.
D Note
• For best results, speak clearly and keep the
microphone about 10 to 15 centimeters (4 to
6 inches) away from your mouth.
• The maximum distance between the docking
station and the dictation microphone is 10
meters (33 feet). If you leave the reception
area of the docking station a vibrating alert
notifies you that the wireless connection
User manual
position to
REC
key to mark the
Finished
key again within half
between the docking station and the dictation
microphone may become unstable. Re-enter
the reception area of the docking station.
When the wireless connection is interrupted,
the dictation microphone beeps and the
dictation software stops recording. See
about wireless connectivity
information about wireless connectivity.
Learn
on page 14 for more
15