Table of Contents
Advertisement
3.6
Turning on/off the SpeechMike
To turn on the SpeechMike, press and hold
1
a On/Off
for about 5 seconds. The battery
indicator will light up.
Once turned on the SpeechMike will
2
reconnect automatically to the docking
station.
•
The wireless connection indicator on the
SpeechMike flashes blue while the connection
is being established.
•
If the connection succeeds, the blue indicator
lights permanently.
•
If the automatic wireless connection fails, set
up the connection manually (see below).
To turn off the SpeechMike, press and
3
hold
a On/Off
for about 5 seconds. The
SpeechMike beeps, and the battery indicator
will light up red briefly.
3.7
Set up the wireless connection
manually
The SpeechMike and the receiver module are
paired by factory default and usually do not not
need to be connected manually. If the automatic
wireless connection fails or if you want to pair
the SpeechMike with another receiver module,
set up the connection manually.
3.7.1
Set up the wireless connection
manually using the docking station
Ensure that the receiver module is inserted
1
in the docking station.
Switch on the SpeechMike, insert it into the
2
User manual
docking slot of the docking station and press
it down firmly until it locks.
Press and hold the pairing key
3
the receiver module for 3 seconds.
•
The receiver module enters pairing mode, and
the pairing key starts to flash blue quickly.
•
If the connection succeeds, the wireless
connection indicator on the SpeechMike and
the pairing key on the receiver module glow
blue permanently.
3.7.2
Set up the wireless connection
manually using the receiver module
If the receiver module is used without the
docking station, follow these steps to set up the
wireless connection manually.
Ensure that the receiver module is
1
connected to the computer with the USB
cable and that the computer is switched on.
Press and hold the pairing key
2
the receiver module for 3 seconds.
The receiver module enters pairing mode, and
the pairing key starts to flash blue quickly.
Switch on the SpeechMike and press the
3
function keys
and
F1
second.
on
[PAIRING]
on
[PAIRING]
simultaneously for 1
F3
13
Advertisement
Table of Contents
