Cause of error
A booklet jam has occurred in section TB.
A booklet jam has occurred in section TA.
Trimming waste exits at the delivery sec-
tion.
* If the operator panel displays an error message while the conveyor is not full, then trim
waste may block the sensor.
Overview of possible errors
Solution
•
Open the front cover (1) and the
transport belt unit B.
•
Remove the jammed booklet.
•
Place the transport belt unit B back
to resume printing.
•
Lift handle E and remove the
jammed booklet.
•
Open the delivery section cover (2).
•
Open the A transport belt unit.
•
Remove the jammed booklet.
•
Close transport belt unit A.
•
Close the delivery section cover (2) to
resume printing.
Chapter 4 - Troubleshooting
35