Table of Contents
Advertisement
Trim section
Main parts
Main parts
A
B
C
D
E
F
G
H
I
18
Chapter 2 - Parts and their functions
#
Part
Infeed section
Entrance transport belt
unit (TC3)
Transport belt unit
Hand wheel (TC1)
Trimmer waste tray
Handle (TC2)
Transport belts
Transport belt unit
Transport belt unit
(TC4)
Description
Remove jammed booklets from the space here.
The transport belt unit TC3 feeds the sheets to
the trimmer. If booklets jam in the trim section
entrance, hold the green handle and open this
mechanism to remove the jammed booklets.
•
To open the unit, hold and press the handle,
•
Pull to the right
•
Lift the mechanism up
The hand wheel helps you to solve booklet jams.
When booklet jams occur between the infeed sec-
tion and the trim section,turn the hand wheel
clockwise and transport the booklet completely to
the trim section. Then pull out the trim unit and
remove the jammed booklet.
The waste tray collects the trim waste from trim-
ming the booklets. The printer displays an error
message when the tray is full. When you empty
the tray, make sure to remove the trim waste that
dropped outside the tray.
Use the green handle TC2 to pull out the trim
unit.
The transport belts move the booklets.
•
Hold and press the handle.
•
Open the belt unit to the right to remove the
jammed booklets.
The transport belt unit TC4 moves the booklets.
It contains a handle with a green label to remove
jammed booklets.
•
To open the unit, hold and press the handle,
then
•
Open to the right.
Advertisement
Table of Contents
