Table of Contents
Advertisement
Overview of possible errors
Possible errors
Errors and solutions
Cause of error
The delivery section cover is open.
The front cover is open.
The trim unit is not inserted correctly.
The trimmer waste box is not inserted
correctly.
The conveyor is full.*
The trimmer waste box is full.
A booklet jam has occurred in section
TD.
A booklet jam has occurred in section
TC.
34
Chapter 4 - Troubleshooting
#
Solution
Close the delivery section cover (2).
Close the front cover (1).
Hold handle C2 and insert the trim unit
to the back end correctly.
Make sure that the trimmer waste box (3)
is inserted until the back end completely.
Lift handle E and remove the booklets
from the conveyor.
•
Open the front cover (1).
•
Pull out the trimmer waste box (3)
and empty the box.
•
Place the trimmer waste box back.
•
Close the front cover (1).
•
Open the front cover (1).
•
Remove the jammed booklets from
the space on the trim unit.
•
Close the front cover (1) to start re-
sume printing.
•
Open the front cover (1).
•
Turn handle C1 clockwise to trans-
port the jammed booklet to the trim
unit completely.
•
Hold handle C2 to pull out the trim
unit.
•
Open the transport belt unit C3 and
C4 and remove the jammed booklet.
•
Close the transport belt unit C3 and
C4.
•
Hold handle C2 to place the trim
unit back.
•
Close the front cover (1) to resume
printing.
Advertisement
Table of Contents
