Table of Contents
Advertisement
Connecting the units
About suitable
specification of speaker
Ensure speakers conform to the following
standards, otherwise there is a risk of fire,
smoke or damage. Speaker impedance is 2 W
to 8 W for stereo connection, or 4 W to 8 W for
monaural and other bridge connection.
Subwoofer
Speaker channel
Power
Nominal input:
Two-channel output
Min. 125 W
Nominal input:
One-channel output
Min. 300 W
Other than subwoofer
Speaker channel
Power
MAX input:
Two-channel output
Min. 250 W
MAX input:
One-channel output
Min. 600 W
Connecting the speakers
and RCA input
The RCA input mode can be two-channel
(stereo) or one-channel (mono).
The figures below show examples of connec-
tion. Connect the speaker leads and RCA
input accordingly to suit the mode.
Two-channel input (Stereo)
When connecting two speakers (Left
and right)
1 Speaker output (Right)
2 Speaker output (Left)
3 RCA input jack A (Left)
4 RCA input jack B (Right)
5 RCA cable (sold separately)
6 From car stereo (RCA output)
Two-channel input (Stereo)
When connecting a speaker (Bridge)
1 Speaker output
2 RCA input jack A
3 RCA input jack B
4 RCA cable (sold separately)
5 From car stereo (RCA output)
One-channel input (Mono)
When connecting two speakers (front
left and rear left)
! Slide INPUT (input) switch to 1CH position.
! Audio from RCA input A will be output
from the speakers.
Section
3
4
1
5
2
6
2
3
4
1
5
02
Advertisement
Table of Contents
